Essential 3D printer maintenance tool deals — save up to 30% on precision tools, lights, snips, and more
Keep your 3D prints and printers in tip-top condition
3D printing is a fun and rewarding hobby, but with it also comes the frustrations of trying to maintain the quality output of your printer and also tidying up the finished look of your prints. You need a host of tools to keep the process running smoothly.
Some manufacturers throw a few cheap tools in the box with a new 3D printer, but if they don't, then investing in a dedicated 3D printer toolkit will make a huge difference in caring for not only your 3D printer, but also your creations.
We've trawled through the Amazon Prime Big Deal Days sales event and used our expert knowledge to source the tools you absolutely need for your 3D printing toolkit.
Quick links
- Creality 3D printer tool wrap. (Save 32%)
- Flush Cutters. (Save 21%)
- 49-in-1 Precision Screwdriver Set. (Now just $5.69)
- HOTO 24-in-1 Mini Screwdriver. (Save 30%)
- HOTO Precision Electric Screwdriver Set. (Save 25%)
- Wuben E7 Mini Flashlight (Save 24%)
A large 3D printer tool wrap set
This 74-piece 3D printer tool kit from Creality is packed with everything that you need to keep your printer going. This toolkit has everything from a 34-piece screwdriver set to a magnetic project mat. Perfect for a budding 3D printer enthusiast, this is a "one and done" purchase.
You get everything that you could ever need to keep your 3D printer running at optimal efficiency, and best of all, it rolls up into a tool wrap
Read moreRead less▼
Essential cutting tools
Whether you are cutting your filament, cleaning out supports, or removing cable ties, wire/flush/side cutters are an essential part of the 3D printer toolkit. Sometimes you get a pair with your printer, but if you don't, or you need a spare set, then this pair of snips is a good alternative for you.
These cheap cutters are superb for 3D printing, electronics, and some general home maintenance tasks. Model makers and electronics hobbyists can also use these cutters to trim parts of dried knots and dribbles.
Trim, cut, and rip plastic from places where it shouldn’t be. Then use these cutters to trim electronic components or for other craft projects.
Read moreRead less▼
Hex Keys
Hex keys are essential 3D printer tools. The majority of 3D printers are held together by machine screws that sport an Allen / hex head. If you don't get a set with your printer, it's not too much money to buy a spare set off Amazon.
A 9-piece metric Hex key set with sizes from 1.5-10mm, with long ball end
Read moreRead less▼
When the prints don't pop off the plate
A 3D printer's print beds are designed to be super grippy, so the side effect is that sometimes you may need to use a tool to persuade the print to release from the print sheet. Scrapers are superb tools for the job, with the thin metal blades perfect for breaking the seal between the print and the build plate!
We've got angled scrapers in various sizes, and two smaller scrapers, one with a metal blade, the other with plastic to protect your print bed.
Read moreRead less▼
Screwdrivers
A good general-purpose precision screwdriver set is a necessity. This 49-in-1 set isn't on sale, but it has all the bits and is super cheap. For higher quality, you can step up to the HOTO driver, albeit with fewer bits, or go all in on an electric screwdriver.
All the bits that you will ever need to keep your 3D printer running smoothly, and you get a great case to keep them all in.
Read moreRead less▼
Sleek, compact and with 24 double-ended bits crammed inside, the Hoto 24-in-1 precision screwdriver should be in your 3D printer toolkit.
Read moreRead less▼
A go-to screwdriver set for the office, workshop and your go-bag. With all the bits you will need to fix a multitude of problems.
Read moreRead less▼
Unclog or change your 3D printer nozzle
3D printers will get clogged at some point; that's a 100% guarantee. Hot plastic or the wrong type of filament being used at the wrong temps will mess up the most expensive printers. Luckily, the solution to this common problem is a very low-cost one.
Swapping out the nozzle on your 3D printer is also a fairly simple task, but that task is made far easier with the right tools.
Tackle a blocked nozzle from another angle with the Creality Clog Poke. Instead of pushing into the nozzle, remove the PTFE tube and push this clog poke into the throat of the extruder, forcing molten plastic out of the nozzle.
Read moreRead less▼
Here you have all the gear to maintain the business end of your 3D printer. Nozzle wrenches, needles, tweezers and two handy brass bristled brushes to keep your prints running smoothly.
Read moreRead less▼
Clean up your prints
Take your prints to the next level by giving them a professional finish. Clean up the edges of your projects and remove leftover bits of print support with this handy deburring tool.
This is the deburring tool that I personally use, and it has been stellar since day one. A sharp, but safe blade trims unwanted plastic from prints, leaving a clean edge without risking my fingers.
Read moreRead less▼
Shine a light on it
Perfect for performing repairs in the tight spaces of an enclosed 3D printer, or for attaching to a cap to light up the project you're working on and highlight any print deformities that may need addressing. With 1800 Lumens of light, USB Type-C charging, an IP68 rating, a baseball cap clip, and a magnetic base, this is a great flashlight for working on 3D printing projects.
With USB Type-C charging, six brightness modes, and a magnetic base, the Wuben E7 is a useful flashlight for makers and tinkerers who want extra light for their work, without compromising on quality.
Read moreRead less▼
This compact and easy-to-use flashlight provides 50 Lumens of light, without the need to fiddle around for a button. Just unclip, and your flashlight is ready to light your way.
Read moreRead less▼
More Prime Day Tech Deals
Join the Tom's Hardware deals Discord for up-to-the-minute hardware deals.
Best Tech and PC deals | Best gaming PC deals | Best RAM combo deals | Best 3D printer deals | Best RAM deals | Best gaming laptop deals | Best monitor deals | Best Wi-Fi Router deals | Best GPU deals | Best SSD deals | Best hard drive HDD deals | Best CPU deals | Best gaming chair deals | Best PC building tool deals | Best PC peripherals deals | Best filament and resin deals | Best motherboard deals | Best CPU cooler deals | Best PC case deals | Best Dell and Alienware deals | Best USB charger deals | Best gaming and productivity laptop deals under $1,000 | Best laptop PC deals
Get Tom's Hardware's best news and in-depth reviews, straight to your inbox.
Stewart Bendle is a deals and coupon writer at Tom's Hardware. A firm believer in “Bang for the buck” Stewart likes to research the best prices and coupon codes for hardware and build PCs that have a great price for performance ratio.