From $100 To $160: Five Z68-Based Boards, Compared

Features
By
published

Value-oriented system builders celebrate new-found performance and features as Intel continues pushing its mainstream platform towards the high-end. Today, we draw a line in the sand and consider five motherboards priced between $100 and $160.

TZ68A+ Firmware

The TZ68A+ translates Biostar’s familiar O.N.E. menu to UEFI, with little more than a shift from tabbed menus to icons and an updated background image separating the two styles.

The top of this menu features CPU ratio and current override controls. One must scroll down a little to get to the base clock setting, passing along the way a GPU multiplier for overclocking internal graphics.

The acronym O.N.E. starts to make sense as we scroll further to find primary memory timings on the same menu.

Voltage settings are placed near the bottom of O.N.E., just below the secondary memory timings. Biostar adds a full set of integrated graphics voltage controls, in addition to the expected core voltage settings.

As we reach the end of O.N.E., we finally find chipset and memory voltage controls. Note that “CPU VCore LoadLine” means “allow droop voltage,” so that choosing disabled actually enables the feature most of Biostar’s competitors refer to as “Load Line Compensation”.

TOPICS
Thomas Soderstrom
Thomas Soderstrom
Thomas Soderstrom is a Senior Staff Editor at Tom's Hardware US. He tests and reviews cases, cooling, memory and motherboards.
52 Comments Comment from the forums
  • vilenjan
    What about looks? The gigabyte board looks so meh, while the MSI board is sexy!
    Reply
  • compton
    I temporarily used a Biostar TH67+ 1155 mobo until I picked up my new board. After seeing the description of the Z chipset's Graphical UEFI I checked Biostar's website. It looks as though they're released the graphical UEFI for all biostar 1155 mobos.

    Now I just wish Intel would do the same -- can't they just rip off Asus's UEFI implementation?
    Reply
  • johnnyb_27
    Why not use the MSI's Z68A-G65 instead of the MSI's Z68A-G55? They were the same price but now the drop MSI's Z68A-GD55 to 154 before rebate.
    Reply
  • dirtmountain
    Sorry, but rebates don't count. A nice test of the other 4 motherboards though.
    Reply
  • hatethisbull
    90% of this article could've been compressed into the summary page. I would've preferred to see comparisons between, say, a $70 h67 and a high-end z68. Instead of four pages of unsatisfying gaming benchmarks, how about focusing on board usability? Which of the boards have cheap PCI-E retention clips that are going to pop off on first use? Which ones will have blocked ports, etc.
    Reply
  • The Greater Good
    vilenjanWhat about looks? The gigabyte board looks so meh, while the MSI board is sexy!
    Do you stare into your case whilst computing, or do you look at the monitor?
    Reply
  • aznguy0028
    The Greater GoodDo you stare into your case whilst computing, or do you look at the monitor?I look into my case daily when I use the computer. There's a reason why there is a window, and hours of hard work for your perfect wiring job deserves much credit and to be stared at. Not to mention coloring schemes that matches your case/mobo pcb color/fan led colors/etc.
    Reply
  • jerreddredd
    isn't it time we lost the PS2 port? and maybe even the DB15 VGA port also?
    Reply
  • Crashman
    johnnyb_27Why not use the MSI's Z68A-G65 instead of the MSI's Z68A-G55? They were the same price but now the drop MSI's Z68A-GD55 to 154 before rebate.MSI picked the GD55 because it's SUPPOSED to cost $160. MSI did NOT pick the GD65 because it's SUPPOSED to cost $180. MSI's predictions from a few weeks back simply didn't pan out.
    Reply
  • Crashman
    jerreddreddisn't it time we lost the PS2 port? and maybe even the DB15 VGA port also?Not PS/2, just VGA. They leave the Multi-I/O controller on the board for compatibility in other areas, so PS/2 is "free" and some people still use it at the high end.

    Some cheap monitors still use VGA, but these boards are not for the budget market! For VGA compatibility (for external capture devices and such) they could just use DVI-I and let the oddball user who needs VGA for that oddball purpose supply his own adapter.
    Reply