Early Verdict
The XP1200M fails to impress since with this amount of money someone can find better performing units, featuring a much more silent operation. Gigabyte should try harder in this market segment, if it wants to keep up with the strong competition.
Pros
- +
Full power at 49 °C
- +
Fair ripple suppression
- +
Quality caps
- +
5VSB efficiency
- +
Fully modular
- +
Long cables
Cons
- -
Tough competition
- -
Price
- -
Noisy
- -
Efficiency at light loads
- -
Hold-up time
- -
Inaccurate Power OK signal
- -
Transient response performance
- -
Number of PCIe connectors
Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.
Gigabyte XP1200M Power Supply Review
Gigabyte recently revealed its Xtreme Gaming line of PSUs, which currently includes one 1.2 kW model. Obviously, that capacity point only addresses high-end enthusiasts with multiple graphics cards installed. Given the improved efficiency of 14/16 nm GPUs, though, unless you plan to use three- or four-way SLI/CrossFire, you shouldn't need more than a 1 kW PSU. Then again, ultra-aggressive overclocking will definitely affect the power requirements of less elaborate configurations. You see, at stock clock rates, modern GPUs can be power-friendly. But under extreme overclocking, all bets are off. If you're a hardcore tuner, a capable PSU like Gigabyte's XP1200M makes more sense.
The XP1200M is built by Enhance Electronics. It actually employs the same platform as Rosewill's Quark power supply, and given our experience with the Quark 1000, we don't expect the XP1200M to offer ground-breaking performance. It'll probably have a hard time competing against the other models in this crowded category. Though Enhance is known for its solid implementations, the company isn't particularly innovative, so its benchmark results typically don't stand up to the high-end designs from Super Flower, CWT, Flextronics, and Seasonic.
Any high-end PSU should be fully modular, and that's indeed the case for Gigabyte's XP1200M. In addition, this unit sports a single +12V rail and appealing aesthetics (thanks to an orange-colored fan and a nicely-finished chassis). Gigabyte says it uses Japanese caps. The company also claims its double ball-bearing fan has a lifetime of at least 50,000 hours. Unfortunately, there is no semi-passive mode, which could have greatly reduced the XP1200M's noise output under light and moderate loads. Then again, if the fan spins up slowly and its start-up voltage is low, the absence of a semi-passive mode may not be noticed.
Specifications
The most important feature is 80 PLUS Platinum-rated efficiency, though we're immediately put off by a 40 °C temperature rating. Enhance usually uses this low specification, so no surprise there. In our experience, most of the company's platforms have no problem delivering full power for prolonged periods at much higher ambient temperatures. The only problem is a fan profile tuned with the 40 °C ceiling in mind. Above that threshold, the fan goes crazy and noise output increases.
The PSU features fully modular cabling, as we already mentioned, along with a full suite of protection capabilities that includes over-temperature protection. This is probably the most important protection for a PSU; it can really save the day in the event of a fan failure. Gigabyte does use that dual ball-bearing fan, which it says should last longer than other designs. But it also makes more noise than FDB fans.
Gigabyte's five-year warranty is long enough to keep us satisfied. Still, the competition in this price class offers anywhere from seven- to 10-year coverage, leaving Gigabyte in the dust.
Power Specifications
| Rail | 3.3V | 5V | 12V | 5VSB | -12V | |
|---|---|---|---|---|---|---|
| Max. Power | Amps | 25 | 22 | 100 | 2.5 | 0.3 |
| Watts | 120 | 1200 | 12.5 | 3.6 | ||
| Total Max. Power (W) | 1200 |
The minor rails are strong enough to support any contemporary system, while the +12V rail is powerful, offering 100 A maximum current output. On the other hand, we'd like the 5VSB rail to provide more juice. A rating of 2.5 A looks anemic for a 1.2 kW PSU.
Cables And Connectors
| Modular Cables | ||
|---|---|---|
| Description | Cable Count | Connector Count (Total) |
| ATX connector 20+4 pin (700 mm) | 1 | 1 |
| 4+4 pin EPS12V (800 mm) | 1 | 1 |
| 4+4 pin EPS12V (650 mm) | 1 | 1 |
| 6+2 pin PCIe (650 mm) | 2 | 2 |
| 6+2 pin PCIe (650 mm + 100 mm) | 2 | 4 |
| SATA (550 mm + 150 mm + 150 mm + 150 mm) | 3 | 12 |
| Four-pin Molex (550 mm + 150 mm + 150 mm + 150 mm) | 2 | 8 |
| FDD Adapter (100 mm) | 2 | 2 |
All cables are extremely long, and the distance between the SATA and peripheral connectors is ample at 15 cm. The only downside we anticipate for some enthusiasts is too-few PCIe connectors (you get six). Some similar-capacity PSUs offer eight or more. Gigabyte is conservative in this regard, particularly on a PSU in a family called Xtreme Gaming.
At least there are enough SATA and peripheral connectors. And instead of the usual single FDD adapter, you get two. More than likely you won't even need one, but Gigabyte still threw a couple in its bundle to cover your bases, just in case.
The ATX, EPS, and PCIe connectors use 16-gauge wires for lower voltage drops at higher loads, while everything else uses the typical 18-gauge wires.
Power Distribution
Since this PSU features a single +12V rail, we do not have anything to say about its power distribution.
MORE: Best Power Supplies
MORE: Power Supplies 101
MORE: How We Test Power Supplies
MORE: Picking The Right Power Supply: What You Should Know
MORE: All Power Supply Content
